Racks

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Designed to fit two 18-packs of your favorite beer (or your lunch, laptop, groceries, etc...), this handy rear rack is ready to haul it all! Removable tie-down rails give you somewhere to strap down loose loads or pop them off to create a flat-bed rack that can handle those 3 XL pizzas you just ordered. One ride with this rack and you'll wonder how you ever managed to carry everything without it.

The Fairdale Adjust-A-Rack is a new take on the rear cargo rack. The rack is designed to be extremely easy to install. Fold the legs out, bolt them on to the bike and use the sliding adjustment to level the top of the rack. Unlike many other racks the Adjust-A-Rack requires no cutting or tedious resizing to make it fit.

- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg

The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

- Rear rack with folding sides that allow for an easily expandable platform size - Sturdy tubular powder-coated alloy construction - Adjustable legs fit frames from 26" to 29" - Available in disc brake and rim brake compatible models - 59lb weight limit

What does the HD stand for? Heavy Duty. Sunlite's Gold Tec HD Rack is made for the hardcore commuters and tourers out there that load up and ride more than most people drive. Made from lightweight tubular aluminum, the HD Rack is durable enough for daily commutes, tough enough for cross-country trips and doesn't weight you down. The top deck has a capacity of up to 55 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.

- Rear alloy beam style rack with integrated fishing rod holder - Equipped with mounting racks on each side for rod holders - One rod holder included that can be mounted on either side - Universal design fits seat posts between 25.4 and 31.8mm (with included shims) - Extra rod holders sold separately - Type: Rear Mount: Seat post - Color: Black Compatibility: Universal - Note: Includes 1 Rod Holder

Turn almost any bike into a cargo hauling machine with our popular Eco Rack. Its classic good looks and ease of installation make this rack a great choice for carrying more and going farther.

Q/R Rear Rack for Bicycle - easy to attach and secure stem mount rack. - Easy on and off with our quick release clamp. - Base is adjustable allowing cargo to be further away or closer to seat. - EZ Clamp will tighten firmly, no movement from side to side. - Made steel and zinc diecast. - Weight limit 12 lbs.

This tubular alloy front rack with espresso stained wood plank cargo deck is perfect for getting take-out or a 6-pack. Adjustable struts for use with 26-inch through 29-inch wheel sizes. The 15 x 13.25-inch deck supports cargo up to 11 lbs.

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Minoura's KCL-3F Pouteur is made from welded steel tubing and mounts to the front of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

- Great rack for long distance touring with side bar for additional strength and stiffness - Compatible with all MTX 1.0 and 2.0 bags - T6061 T6 10mm hollow tube alloy construction - Disc mounts allow for mounting to bicycles with disc brakes - 739g - 55lb weight capacity

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes. - Fits bikes with disc brakes: offset with integrated spacer - W-bend stays keep pannier hooks in place - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm

The Pizza Rack is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - 371mm from the mounting point to the underside of the deck. - Front mountable. - Fits up to 157mm wide hubs. - Made from 6061 aluminum, the racks are lightweight, stiff, and strong. - Frame is made of 1/2" (13 mm) diameter tubing. - Deck measures 12.9 x 10 inches (326mm x 255mm), includes slots for easily lashing gear in place and holes for a light mount. - Standard, eyelet mount ready with optional fit kits available for thru axle or QR mounting. - Load capacity of 35lbs/15.8kg - Powder coated a sleek and refined shade of black - Made in Taiwan - Lifetime Warranty

A low-profile rear carrier with a minimalist approach, the Vega Evo is made for everyday commuting or as a lightweight weekend trip carrier. It utilizes double struts for attachment to the seat stays. The Vega Evo features 3D-feet and stay mounting for the 2012 models on. There are four points that can be attached to your frame (even with small frames). - Weight: 510g/18 ounces - Load capacity: 25kg/55 pounds - Wheel sizes: 26-inch/700c

Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile

Sunlite's Gold Tec Disc Rack fits almost any disc brake-equipped bike with wheel sizes of 26-inch, 27-inch, and 700c. Made from lightweight tubular aluminum, the Disc Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers.

Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.

The Tubus Fly is made of two stainless-steel tubes, making it the purist in the lightweight class. This 369-gram masterpiece carries 18 kilograms of luggage, making this model one of the most efficient racks available. With the Fly, optical pleasure and high function work in perfect harmony.

Great little aluminum rack. Perfect for strapping a Wald basket to, or on its own to support a handlebar bag. Stainless hardware, includes mounting tang and spacers so that you can clear the fork leg when you mount to the eyelets on the backside of your fork. Works well with a set of P-clamps as well (included). The Lucas 3 differs from the Lucas 1 in that we added a mid-fork mount for extra stability. - Round eyelets for strapping/zip-tying things on - Platform measures 240mm x 130mm - The eyelet to the bottom of the rack is 365mm. - Load capacity: 10kg/22 lbs. - Greyish silver or black - Weight: 570g

Add some cargo-hauling capacity to your bike with Sunlite's Utili-T QR Beam Rack. It doesn't matter if you are commuting, touring or running errands, this rack holds up to 25 pounds of gear and simply attaches to your post via a quick-release bracket. It also sports side supports for panniers. It fit posts from 25 to 32mm in diameter and is made from lightweight tubular aluminum.